Description

Vintage looks, retro styling, simple and cheap. 12V system with three wires for running light and brake light functionality. Placed into the fiberglass tail singly… the 2” lens has a 1” housing that you can drill through a fiberglass tail and easily mount.

It doesn’t get much easier…you’re welcome.

These are about as small as we have seen for a fully functional flush-mount running/tail/brake light. If that’s the look you’re going for, get it here. When installing these, the three wires are: Black = Ground, Red = Constant, Yellow = Brake. 1 and 3/4 inches height, 2 and 3/4 inches length, depth is approximately 2 inches for the housing (the lens protrudes the most in the center) and the wires are housed in a separate 3/4 inch extension which also happens to be the length of the bolts. 4.4 cm height, 7 cm length, depth is approximately 5.1 cm for the housing (the lens protrudes the most in the center) and the wires are housed in a separate 1.9 cm extension which also happens to be the length of the bolts.

Shipping to Canada requires $10.95 USD for postage, all other international locations will be $16.95 USD